New Updated - Prism II
Computer Front End Software Program
For Microsoft® Windows® NT 4.0/ Window® 2000/ Windows® XP (Recommended) or Windows® Vista
Version 3.1.5
To Download Click On The Prism II Logo

Note: If you have currently have Prism installed on your computer and you want to upgrade from Prism, Prism II version 1.x.x, Prism II version 2.xx without having to re-enter all the data you have programmed for unit descriptions and job sites, you must run the update software contained in the download file before installing the Prism II software.

Download and read this file if you are unsure how to install or update the Prism II version 3.x.x program
 Prism II Upgrade & Installation Instructions

Download this file if you want to set up a DEMO of typical Orion Controllers
To Download Prism II Demo Mode Files - Click Here

WattMaster customers now have new complete Windows Based Graphical Interface intended to ease the user interaction with their building HVAC system. It provides enhanced, easy to understand status screens for each type of WattMaster system installed. Prism II software has provisions for custom screens which allow floor plans, equipment photos or user defined summary screens to be implemented by the user to meet their own individual needs. All controlling setpoints, trend logs and alarm conditions are accessed in the Prism II environment. Prism II can be configured for a direct On-Site installation, a Remote Modem connection, or a TCP/IP Internet connection to several installations.

To use Prism II you or your end user must have a computer that meets or exceeds the following specifications:

Software Requirements
Operating System • Microsoft® Windows® 2000, Windows® XP, Windows® Vista or, Windows® 7,
Minimum Hardware

• Windows® compatible computer
• Pentium 2 GHz Processor (Recommended: Pentium 4 2 GHz or greater)
• 1GB RAM (Recommended)
• 120 MB hard drive space
• XVGA (1024 x 768) adapter and monitor (Recommended: 1280 x 1024)
• Network card for TCP/IP connection when IP Module is used
In addition, you must order and install the optional CommLink IV Communications Interface (if not already on your system) in order to connect and communicate between your computer and the system. If remote communications to the installation are required, the Remote Link II on-site modem (phone line) or the IP-Module (Ethernet) must also be installed.

Prism (Old Version)
Computer Front End Software Program
For Windows 95/98/ME/XP/2000
Prism Version 3.3.29
Is Available Below

14.0 Megabyte Download
Includes Online Prism Technical Guide

 Orion Prism Installation Instructions
Download and read this file if you are unsure how to install the program

Orion users now have a complete Windows Based Graphical Interface intended to ease the user interaction with their building HVAC system. It provides standard, easy to understand status screens for each type of Orion system installed. Prism software has provisions for custom screens which allow floor plans, equipment photos or user defined summary screens to be implemented by the user to meet their own individual needs. All controlling setpoints, trend logs and alarm conditions are accessed in the Prism environment. Prism can be configured for a direct On-Site installation, a Remote Modem connection, or a TCP/IP Internet connection to several installations.
To use Prism you or your end user must have a computer that meets or exceeds the following specifications:

  • IBM™ compatible computer
  • Pentium 200 MHz or Faster Microprocessor
  • 64 Megabytes RAM
  • Windows 95 / 98 / ME / XP/2000
  • Super VGA Monitor with 1024 x 768 Resolution Minimum
  • Available Serial Port for On-Site Installations
  • Internal or External Modem for Remote Installations
  • Network Card for TCP/IP Communications

In addition, you must order and install the optional CommLink II Communications Interface in order to connect and communicate between your computer and the system. If remote communications to the installation are required, the Remote Link on-site modem must also be installed.

Orion ToolBox
HVAC System Calculator
Software Program
For Windows 95/98/ME/XP/2000
Orion Toolbox
Version 2.3.4
Is Available Below

2.17 Megabyte Download
To Download The Latest Version Of Orion ToolBox
Click On The Cloud Icon Above

 Orion ToolBox Installation Instructions
Download and read this file if you are unsure how to install the program

The Orion ToolBox software is an interactive program for understanding HVAC unit performance. It contains an active simulation of a virtual HVAC unit running the Orion - MUA II software. This part of the Orion Toolbox is great for finding out what equipment options should be selected on an AAON unit to provide the best possible leaving air conditions to meet a specification. It can also be used to better understand the psychrometrics involved in unit operation. Other tools are provided within the Orion ToolBox for calculating mixed air streams and their thermodynamic properties as well as thermistor curve charts to convert voltage or resistance into temperature.
To use Orion ToolBox you must have a computer that meets or exceeds the following specifications:

  • IBM™ compatible computer
  • Pentium 200 MHz or Faster Microprocessor
  • 64 Megabytes RAM
  • Windows 95 / 98 / ME / XP/2000
  • Super VGA Monitor with 1024 x 768 Resolution Minimum

IP-Link Software, Drivers and Manual
For Windows 98/ME/XP/2000

To Download the Software File
Click on the Picture Below

Revised 05-04-10
OE368 PT-Link Set-up Files & Utilities For All Protocols
For Windows 98/XP/NT/2000

To View The Instructions For The PT-Link Set-up Files And Utilities
Click Here

To Download The PT-Link Set-up Files And Utilities
Click Here

 

CommLink III, IV & USB Link
USB Drivers & Software
For Windows 98/ME/XP/2000/Vista

To Download the Software File
Click on the Picture Below

Home

 Products

Company

Contact Us 

Software 

 Literature

Distributor 

Training

Parts

 © 2009 WattMaster Corporation, All Rights Reserved. Orion Controls is a trademark of WattMaster Controls, Inc.
AAON® is a registered trademark of AAON® Incorporated. All other products are trademarks of their respective companies.
For comments please contact the webmaster at mail@wattmaster.com